C Hodge Fencing 01631 563271

See what you have already loaded onto your trailer.

view trailer

Order complete?
Then go to checkout.


Metal Fencing Components and Tools

Clipex posts are designed to suit specific fencing applications, if you need a different pattern please contact us. Our wider range of tools for more general fencing uses can be found on our fencing tools page.

As well as part of Strainer kits, we also sell some Clipex fence components individually. These individual components are listed on this page.

There are also tools intended specifically for use with Clipex post and wire fencing, these can be found listed below.

We strongly recommend the use of the post driver sleeves, they make life so much easier as you have a guide as to how far into the ground your post should go. T-Clips are recommended by Clipex but are not essential, it is fine to tie wire off as well.

Please note - prices on this website do not include VAT. VAT is added in the checkout area and will be included in the total in the confirming email sent to you on completion of your order.

click photo to enlarge

2.4m Stayfast Strut Stock only

  price quantity
2.4m Stayfast Strut Stock only £32.18

Length 2.4m, gauge 3.0mm

click photo to enlarge

Pin and plate only

  price quantity
Pin and plate only £11.22

Heavy duty galvanised 5mm holed pressure plate with 750mm x 20mm dia solid steel pin

Beefy strut bracket

  price quantity
Beefy strut bracket £10.00

click photo to enlarge

Post driver sleeve, Eco and Standard

  price quantity
Post driver sleeve, Eco and Standard £27.02

The Clipex driver tube protects the end of the post if you are using a maul or sledge hammer to drive in an Eco or Standard post.

click photo to enlarge

Post driver sleeve, Beefy

  price quantity
Post driver sleeve, Beefy £35.40

The Clipex driver tube protects the end of the post if you are using a maul or sledge hammer to drive in a Beefy post.

Post driver sleeve for strainers

  price quantity
Post driver sleeve for strainers £22.51

click photo to enlarge

Clipex Insulators

  price quantity
Clipex Insulators £0.58

Insulators designed for use with the Clipex post system when using an electric fence. They come in packs of 25

click photo to enlarge

Clipex Gripple T Clip

  price quantity
Clipex Gripple T Clip £1.20

The Gripple T-Clip is the fast and easy way to tie-off wire at the start or end of a fence. Suitable for 1.8 -3.25mm wire, Gripple T clips are Ideal for use on all types of stock fence, especially on horse fence where space is tight. Also suitable for tying-off barbed wire. Ties off in seconds and is at least four times faster than knotting. Simply twist onto the line wire and push the tail wire through.

Delivery to Argyll

We will quote you for delivery of materials you order from us because each order is considerably different.

As a rough guide, deliveries within 5 miles of Oban cost £10, within 20 miles of Oban £15, and within 30 miles of Oban £20.

close panel

approximate equivalents

Timber is cut in metric sizes. These approximate equivalents are for your guidance only.

22mm 32mm 38mm 47mm 75mm 85mm 100mm 125mm 150mm 200mm 300mm
1" 1.25" 1.5" 2" 3" 3.5" 4" 5" 6" 8" 12"
1.5m 1.65m 1.8m 2.1m 2.4m 2.7m 3.0m 3.3m 3.6m 3.9m 4.2m 4.5m 4.8m
5' 5'6" 6' 7' 8' 9' 10' 11' 12' 13' 14' 15' 16'
close panel