C Hodge Fencing 01631 563271
Menu
  • Order complete? Then go to checkout.


Fenceposts, Stays and Corner Posts

Please note - prices on this website do not include VAT. VAT is added in the checkout area and will be included in the total in the confirming email sent to you on completion of your order.

pressure treated machine square pointed fence posts

click photo to enlarge
 
length section price quantity
1.5m (5ft) 75x75 (3 x 3in) £3.60
1.65m (5ft 6ins) 75 x 75mm (3 x 3ins) £3.65
1.8m (6ft) 75 x 75mm (3 x 3ins) £5.70
1.8m (6ft) 100 x 100m (4 x 4ins) £8.10
2.1m (7ft) 75 x 75mm (3 x 3ins) £5.90
2.4m (8ft) 75 x 75mm (3 x 3ins) £6.68
  • 75 x 75mm larch or pine posts treated for ground contact, the longest lasting fencepost. The most commonly used length is 1.65m (5ft 6inches). Please contact us direct for pack (150) prices.

 

15 yr warranty class 1 A posts

click photo to enlarge
 
length section price quantity
1.65m (5ft 6ins ) 75 x 75mm (3 x 3 ins) £3.65
2.4m (8ft) 180mm (7.4ins) £29.50
2.4m (8ft) 75mm x 75mm (3ins x 3ins) phone
  • These posts are kiln dried pine or larch treated to HC4 and warrantied by manufacturer backed by treatment manufacturer.

 

Treated strainer pointed end, 15 year warranty

click photo to enlarge
 
length section price quantity
2.4m pointed (8ft) 180mm (7ins) £29.50
3m (10ft) 180mm (7ins) £38.50
  • UC4 warrantied James Jones 15 years

 

pressure treated machine round pointed fence posts

click photo to enlarge
 
length section price quantity
1.65m (5ft 6ins) 75mm (3ins) £3.40
1.65m (5ft 6ins) 85mm (3.5ins) £4.10
2.4m (8ft) 150mm (6ins) £18.10
2.4m (8ft) 175mm (7ins) £24.50
2.65m (8ft 6ins) 75mm (3ins) £4.90
2.65m (8ft 6ins) 85mm (3.5ins) £6.80
2.6m (8ft 6ins) 95mm (3.75ins) £7.95
3.1m (10ft 6ins) 150mm (6ins) £28.50
3.1m (10ft 6ins) 175mm (7ins) £31.50
  • Machined (smooth) round posts treated for ground contact, a 75mm is normally used for patching and an 85mm is used as a permanent post. Easier to erect than square. Please contact us directly for pack (147/194 pieces) prices. Stock fence strainers are normally 2.4m long with intermediate posts at 1.65m. Deer fence strainers are normally 3.1m long with intermediate posts at 2.55m (total length not above ground height)

 

pressure treated peeled fence posts

click photo to enlarge
 
length section price quantity
1.65m (5ft 6ins) 75 - 100mm (3 - 4ins) £5.10
1.65m (5ft 6ins) 90 -110mm (3.5 - 4.5 ins) £5.90
2.6m (8ft 6ins) 75 - 90mm (3-4ins) £7.10
  • Peeled (traditional) posts have the bark removed but are left rough before treatment. Size is a top diameter width, base will be wider. Contact us direct for pack (96) prices

 

pressure treated square stays - 75mm only are pointed

click photo to enlarge
 
length section price quantity
2.1m (7ft) 75 x 75mm (3 x 3ins) £5.90
2.4m (8ft) 100 x 100m (4 x 4ins) £9.10
  • Stays are used to brace the corner posts or strainer posts. 2.4m x 100 x 100 are also ideal for privacy fences of up to 1.8m high. Treated for ground contact. For packs and over (150/ 90 pieces) please contact us direct for prices.

 

pressure treated pencil corner stock height posts

click photo to enlarge
 
length section price quantity
2.4m (8ft) 150mm (6ins) £18.90
2.4m (8ft) 175mm (7ins) £24.50
  • These are smooth, stock height strainer or corner posts, a large gate will require a 175mm post for hanging. 150mm posts are used as turners, fully treated for ground contact. Contact us directly for pack (30 / 40 pieces) prices.

 

pressure treated rough round corner posts

click photo to enlarge
 
length section price quantity
2.4m (8ft) 150 - 175mm (6 - 7ins) £18.90
2.4m (8ft) 175 - 200mm (7 - 8ins) £24.50
2.4m (8ft) 200mm+ (8ins+) £34.50
3.15m (10.6ft) 175 to 200mm (7 to 8ins) £32.50
3.15m (10ft 6ins) 150 - 175mm (6 - 7ins) £28.50
  • 2.4m posts are used for stock height fences, approx 1.6m above ground, and 3.1m posts are used for deer height fences, approx 1.8m above ground. A rough round post is peeled and treated but is not machined to smoothness, they grip the ground and last well. Contact us directly for pack (30) prices.

 

Pressure Treated Natural Round Pointed Strainer

click photo to enlarge
 
length section price quantity
2.4m (8ft) 150-175mm (6-7ins) £19.10
2.4m (8ft) 7-8ins (175-200mm) £26.90
3.1m (10ft 6ins) 150-175mm (6-7ins) £29.58
3.1m (10ft 6ins) 175-200mm (7-8ins) £33.08
 

pressure treated machine round corner posts

click photo to enlarge
 
length section price quantity
2.4m (8ft) 200mm (8ins) £28.50
2.4m (8ft) 175mm (7ins) £23.50
  • Pressure treated smooth strainer post used for stock height fences, approx 1m, with extra large diameter, fully treated for ground contact. Suitable as gate posts for more imposing or particularly large gates.

 

Creosote Treated Pointed Posts and Strainers

click photo to enlarge
 
length section price quantity
1.65 (5ft 6ins) 50 to 70mm (2 to 3ins) £3.23
1.65m (5ft 6ins) 75 x 75mm (3 x 3ins ) £5.90
1.65m (5ft 6ins) 75 to 100mm (3 to 4inch) £4.65
1.65m (5ft 6inch) 80mm £4.25
  • Pressure creosoted in rough round, machined round (80mm) dia and square (75mm x 75mm). Pressure creosote is the longest lasting of all preservative treatments however please be warned there are Health and Safety issues connected with it's installation, please enquire for further details. Best not transported in the back of your car either!

 

presure treated blunt ended posts

click photo to enlarge
 
length section price quantity
1.8m (6ft) 100 x 100mm (4 x 4ins) £7.50
2.4m (8ft) 100 x 100mm (4 x 4ins) £9.10
3 m (10ft) 100 x 100mm (4 x 4ins) £11.50
3.6 m (12ft) 100 x 100mm (4 x 4ins) £13.90
  • Square section 100 x 100 blunt ended posts fully treated for ground contact, useful for sheds, privacy fences, tree houses or fences where extra strength is required. Please contact us direct for pack (77 pieces ) and half pack prices.

 

pressure treated machined pointed turners

click photo to enlarge
 
length section price quantity
2.4m (8ft) 125mm (5ins) £15.80
3.1m (10ft 6ins) 125mm (5ins) £22.50
  • Useful as turners where a fence is runs round a gradual curve and every post has some directional strain on it, also useful for patching or for hard to reach places where a straining post is required. Fully treated. For pack (49 pieces ) or half pack prices please contact us directly. Stock and deer fence lengths listed

 

pressure treated deer fence corner posts

click photo to enlarge
 
length section price quantity
3.15m (10ft 6ins) 150mm (6ins) £27.00
3.15m (10ft 6ins) 175mm (7ins) £30.90
  • These are strainer or corner posts for deer height fences, approx 1.8m high. They are machined (smooth) round and treated for ground contact. A 3.6m gate requires a 175mm dia post to hang on. PLease contact us for pack (30 / 40 pieces) or half pack prices

 

Metal posts

click photo to enlarge
 
length section price quantity
0.9 (Intermediate Post) £22.00
0.9m (3ft) 45 x 45mm (Corner post) £93.98
1.8m (6ft) (Corner Post) £134.66
1.8m (Intermediate Deer Posts) £39.53
1.8m (End Post) £92.46
  • Galvanised Metal Post with point for setting into holes drilled in rock, the posts are set using resin. The posts also has holes and stobs or stays can be nailed onto it to support netting and line wire.

 

Clamp bolt down post support

click photo to enlarge
 
length section price quantity
(4 x 4) 100 x100mm £8.90
(3x3) 75x75mm £6.90
  • Metal Post support designed for securing posts onto a concrete base or wooden platform

 

Clamp Drive in Support

click photo to enlarge
 
length section price quantity
75 x 75mm £6.84
100x100mm (4x4inch) £12.20
  • Clamp Drive in support

 

Metal Post Caps

click photo to enlarge
 
length section price quantity
(4x4inch) 100x100mm £2.10
(3x3inch) 75x75mm £1.30
  • Metal Post Caps

 

Concrete in U Post Support

click photo to enlarge
 
length section price quantity
75x75mm (3 x 3ins) £4.90
100x100mm (4x4inch) £5.90
  • Concrete in U Post Support

 

"Hodge fencing are a rare find in todays business world, combining specialist knowledge, attention to detail and fantastic customer service with the most competitive prices. They are reliable and a pleasure to deal with for an ever expanding range of products and services."

Euan Warnock, Agent, NFU, Oban.

Opening times

Our office hours are 9.00am - 5.00pm Monday - Friday plus 10.00am - 3.00pm Saturday.
How to find C Hodge Fencing

Telephone / fax: 01631 563271

Email: sales@hodgefencing.co.uksales@hodgefencing.co.uk

Delivery to Argyll

We will quote you for delivery of materials you order from us because each order is considerably different.

As a rough guide, deliveries within 5 miles of Oban cost £10, within 20 miles of Oban £15, and within 30 miles of Oban £20.

approximate equivalents

Timber is cut in metric sizes. These approximate equivalents are for your guidance only.

22mm 32mm 38mm 47mm 75mm 85mm 100mm 125mm 150mm 200mm 300mm
1" 1.25" 1.5" 2" 3" 3.5" 4" 5" 6" 8" 12"
1.5m 1.65m 1.8m 2.1m 2.4m 2.7m 3.0m 3.3m 3.6m 3.9m 4.2m 4.5m 4.8m
5' 5'6" 6' 7' 8' 9' 10' 11' 12' 13' 14' 15' 16'

Help and Information Sheets

How to choose fencing materials Download (27 kb)

How to build a wire and timber (stock) fence. Download (775 kb)

How to build a wire and timber deer fence. Download (475 kb)

Ten Tips for High Tensile Stock Fencing from Tornado. Download (440 kb)

How to erect a wooden fence. Download (123 kb)

How to hang a gate. Download (175 kb)

How to lay decking. Download (1249 kb)