C Hodge Fencing 01631 563271
Menu
  • Order complete? Then go to checkout.


Fencing Tools

Please note - prices on this website do not include VAT. VAT is added in the checkout area and will be included in the total in the confirming email sent to you on completion of your order.

pinchbar with tamper

click photo to enlarge
 
  price quantity
pinchbar with tamper £42.50
  • Pointed at one end, approximately 1.5m long and with a flat circle at the other the tamper is used for making lead holes for posts and for tamping down the ground around corner posts that have been set in. We have also been known to use ours for levering several tonnes of fencing off our trailers, they are very sturdy and are useful for lots of jobs. This product can not be posted

 

post driver 4.5 inch

click photo to enlarge
 
  price quantity
post driver 4.5 inch £42.91
  • This is ideal for thumping in 75mm x 75mm square posts or 75 or 85mm round posts, it is safer than using a mell and most people find it easier. It also enables a single person to put posts into the ground. There is no need for a second person holding the post straight. We have chosen the make of post thumper which lasts longest and has the greatest strength. It is also of a weight that suits most users being relatively easy to raise. This product can not be posted

 

post driver 5.5 inch

click photo to enlarge
 
  price quantity
post driver 5.5 inch £58.24
  • This is used for thumping larger posts into the ground, in particular the rough rounds at 75mm to 100mm sizes and even the 125mm turners. The action of the thumper is less difficult to master than that of a mell. A second person is not required to hold the post straight. The weight of the post thumper is easier to manage than that of a mell, this thumper is heavier than the smaller diameter. This product can not be posted

 

Square post driver

click photo to enlarge
 
  price quantity
Square post driver £62.88
  • Out of stock This robust painted metal, square post driver will fit posts up to 90mm x 90mm. It is a good design and easy to use having enough weight to drive a post through any type of ground. The advantage of the square post driver is that you do not need to use a post holder to keep your posts square to your fence line. Effectively this turns a two man job (or one man with very sore knees from holding post holder with leg) into a one man, pain free job. This product can not be posted

 

12lb mell with Fibreglass handle

click photo to enlarge
 
  price quantity
12lb mell with Fibreglass handle £21.50
  • Light weight mell, for garden use. This product can not be posted

 

14lb mell fibreglass handle

click photo to enlarge
 
  price quantity
14lb mell fibreglass handle £62.40
  • Given the choice almost every contractor would use a fibreglass handled mell rather than a wooden one. Although the shaft can not be replaced they do jar the hand, arm and shoulder less than wood which is an important consideration if you are using one every day. This is a robust and well made mell which has been much praised.

 

14lb mell fibreglass handle, with smooth handle

click photo to enlarge
 
  price quantity
14lb mell fibreglass handle, with smooth handle £49.50
 

Post holder

click photo to enlarge
 
  price quantity
Post holder £105.00
  • This is a purpose made tool to hold a square post square to the fenceline while it is being melled or driven into the ground. Skilled fencers can position the post holder with one knee while putting the post in making it a one man operation but it is more usual for one person to hold the post while the other uses the mell or thumper. It is important to align square posts with the fenceline in order to maintain the tension and strength of the fence. These post holders are specially made for us and are intended to withstand the force necesary to keep a post straight. This product can not be posted

 

Ezepull tool

click photo to enlarge
 
  price quantity
Ezepull tool £152.63
  • This brilliant tool has four functions: join wire with 2.5mm, 3.15mm or 4mm crimps; use the tip cutters for cutting in close; or remove electric fence underground cable insulation with the stripping notch. It is also the best tool that the fencing contractors have ever found for removing old staples, even those sunk into their surrounding wood, and for stripping fencelines. This is a tool that most professional fencers are glad to own and for which they find many uses.

 

Crimp Sleeves C3/4 Tub 50

click photo to enlarge
 
  price quantity
Crimp Sleeves C3/4 Tub 50 £19.00
  • To go with the Ezepull, available in size c2/3, c3/4 and c4/5.

 

14 inch wire cutters

click photo to enlarge
 
  price quantity
14 inch wire cutters £13.24
  • This is a useful wire cutter with handles long enough to allow a user to apply leverage. Perfect for the gardener this wire cutter is designed to cope with all types of fencing wire.

 

Wire Side Cutting Pliers

click photo to enlarge
 
  price quantity
Wire Side Cutting Pliers £55.00
  • Pliers good for gripping and bending with handy side cutters. Intended for use on wire up to 2.5mm High Tensile or 6mm Mild Steel. These are a favourite with our contractors who compare them to Felco C7

 

Felco C7 wire cutters

click photo to enlarge
 
  price quantity
Felco C7 wire cutters £38.50
  • The tool of choice for professionals, these spring-loaded wire cutters can cut through all types of fencing wire and are easy to use with one hand. They are small and light enough to be the ideal tool for stripping fencelines on rough ground or in areas which are difficult to access. Our contractors are rarely without at least one each. This product will cost £5 to post.

 

fencing pliers

click photo to enlarge
 
  price quantity
fencing pliers £13.52
  • The toughened steel jaws on these fully insulated, heavy-duty pliers can hold, crimp and cut fencing wire as well as remove staples. This is a good basic tool.

 

Delta ring pliers 22

click photo to enlarge
 
  price quantity
Delta ring pliers 22 £41.58
  • These are used to attach line wire and netting using CL22 clips. They are far faster and easier than trying to tie by hand and they make a very professional looking job of rabbit net in particular.

 

Clip tool gun 2022

click photo to enlarge
 
  price quantity
Clip tool gun 2022 £35.83
  • These are used to attach line wire and netting using CL22 clips. They are far faster and easier than trying to tie by hand and they make a very professional looking job of rabbit net in particular. They are also very useful for garden fencing.

 

rapid FP222

click photo to enlarge
 
  price quantity
rapid FP222 £25.60
  • These are used to attach line wire and rabbit netting using VR22 clips.

 

Vr22 Clips, 1000 pack

click photo to enlarge
 
  price quantity
Vr22 Clips, 1000 pack £14.90
  • VR22 clips are used in a Rapid FP222 clip gun to attach a net to the line wire above it. Many people find them easier to use than lashing rods and they are certainly quicker than tying wire for rabbit and chicken net. Rabbit net clipped to top and middle line wires makes a very strong fence.

 

wire bending tool

click photo to enlarge
 
  price quantity
wire bending tool £3.00
  • Many contractors adapt the angle to suit themselves and drill holes so that these handy bits of kit can be attached to a belt loop. Easier on the hands than bending wire using your fingers, a professionals trick. This product will cost £2.80 to post.

 

shovel tongs - wooden handle

click photo to enlarge
 
  price quantity
shovel tongs - wooden handle £93.22
  • The wooden handled shoveltong or shuvholer is a fantastic piece of kit for digging post holes particularly in sand and gravel. The aim of every fencer is to create a deep, straight sided, neat hole in which to put his corner post and this is what he uses to do it. The handles are replacable when you have finally worn out the first set. These shovel tongs are the contractors preferred tool. This product can not be posted

 

shovel tongs - metal handle

click photo to enlarge
 
  price quantity
shovel tongs - metal handle £106.00
  • Metal handled shovel tongs are sometimes less forgiving on the hands than wooden handled and you will need the services of a blacksmith when you finally wear them out. For the amateur fencer the question of rewelding them is probably academic unless you think that the next two generations are likely to take up fencing. These are heavy duty and extremely strong. This product can not be posted

 

Grafting spade

click photo to enlarge
 
  price quantity
Grafting spade £66.90
  • This is an extra long handled metal spade. It is narrow enough to use for digging strainer post holes without ending up with a crater large enough to lose a quad in and long enough to get a good way down. The fencer shown is well over six foot. This product can not be posted

 

single shuv-holer handle 36 inch

click photo to enlarge
 
  price quantity
single shuv-holer handle 36 inch £8.80
 

Drivall 110cm blue Boundary clamp

click photo to enlarge
 
  price quantity
Drivall 110cm blue Boundary clamp £68.50
  • This stock height, Drivall clamp is the preferred choice for fencers walking in to their fencelines as it is lighter and easier to carry than most other makes. It has feet at either end so can be used in either direction. It is also ideal as a top net clamp when building a split net deer fence as there is less drag than with the Professional clamp. This product can not be posted

 

Strainrite Easy Wire Puller

click photo to enlarge
 
  price quantity
Strainrite Easy Wire Puller £49.50
  • This line wire puller or lobster is a heavy, metal version which should last for many years. It is ideal for barbed wire or line wire. Used to tension around strainer posts it allows the user to free one or both hands to tie off wire. Fits all common wire sizes and the grip will not damage galvanized wire.

 

Strainrite Standard Chain Strainer with Spring

click photo to enlarge
 
  price quantity
Strainrite Standard Chain Strainer with Spring £69.50
  • Ideal with all common types of wire and currently a favourite with our fencers. This puller has spring loaded jaws and a 1.2m chain. Pull should not exceed 350kg. There is a spring kit available to replace worn parts as necesary. Generally a very nice bit of kit and excellent for the professional fencer.

 

Strainrite MK2 Flat Hooked Type Boundary Strainer with 6m chain

click photo to enlarge
 
  price quantity
Strainrite MK2 Flat Hooked Type Boundary Strainer with 6m chain £92.50
  • Ideal for use with Strainrite boards, heavy duty contractor tool.

 

wire unwinder

click photo to enlarge
 
  price quantity
wire unwinder £97.00
  • Wire unwinders are sometimes called Spinning Jennies. They are used to dispense line wire over a long distance. We work hard to source machines that do not jam or unroll too fast, walking back a couple of hundred metres to correct a problem time and time again while laying out line wire is no-ones idea of fun. Wire unwinders normally come with a spike foot and may have fold out arms - our standard model has these making it easier to carry. We can also source atv mounted models and those with a flat foot, please contact us to enquire about other options. This product can not be posted

 

gripple tool

click photo to enlarge
 
  price quantity
gripple tool £76.66
  • The Gripple tool is used with gripples to tension line wire, the new kind also guage the strain on the line. Simple to operate and useful for professionals and amateur fencers alike, this is a great new tool and an excellent innovation. Professionals sometimes use gripples to shape netting to the contours of the ground.

 

Strainrite Ezecut Chisel

click photo to enlarge
 
  price quantity
Strainrite Ezecut Chisel £47.00
  • Specifically designed for fencing.

 

"Hodge fencing are a rare find in todays business world, combining specialist knowledge, attention to detail and fantastic customer service with the most competitive prices. They are reliable and a pleasure to deal with for an ever expanding range of products and services."

Euan Warnock, Agent, NFU, Oban.

Opening times

Our office hours are 9.00am - 5.00pm Monday - Friday plus 10.00am - 3.00pm Saturday.
How to find C Hodge Fencing

Telephone / fax: 01631 563271

Email: sales@hodgefencing.co.uksales@hodgefencing.co.uk

Delivery to Argyll

We will quote you for delivery of materials you order from us because each order is considerably different.

As a rough guide, deliveries within 5 miles of Oban cost £10, within 20 miles of Oban £15, and within 30 miles of Oban £20.

approximate equivalents

Timber is cut in metric sizes. These approximate equivalents are for your guidance only.

22mm 32mm 38mm 47mm 75mm 85mm 100mm 125mm 150mm 200mm 300mm
1" 1.25" 1.5" 2" 3" 3.5" 4" 5" 6" 8" 12"
1.5m 1.65m 1.8m 2.1m 2.4m 2.7m 3.0m 3.3m 3.6m 3.9m 4.2m 4.5m 4.8m
5' 5'6" 6' 7' 8' 9' 10' 11' 12' 13' 14' 15' 16'

Help and Information Sheets

How to choose fencing materials Download (27 kb)

How to build a wire and timber (stock) fence. Download (775 kb)

How to build a wire and timber deer fence. Download (475 kb)

Ten Tips for High Tensile Stock Fencing from Tornado. Download (440 kb)

How to erect a wooden fence. Download (123 kb)

How to hang a gate. Download (175 kb)

How to lay decking. Download (1249 kb)